Forming a new risk pool from scratch requires establishing the covered population, defining the scope of covered losses, calculating expected loss frequencies and severities, setting contribution rates, and creating governance, claims-handling and reserve policies tailored to the organization’s exposure profile. For EHS professionals, these tasks are not just financial exercises: they determine how incidents are categorized, how corrective actions are tracked, and how incident costs flow into workers’ compensation and liability exposures that can trigger OSHA citations, drive up experience modification rates, and materially increase total cost of risk. Poorly designed pools can conceal systemic hazards, delay corrective action, and amplify regulatory consequences and litigation risk.
Because a credible risk pool depends on reliable incident data, consistent hazard assessments, clear ownership of controls, and defensible actuarial assumptions, building one requires coordinated workflows across inspections, incident reporting, LOTO/confined space procedures, corrective action tracking, and asset/chemical inventories. Integrating these datasets also supports transparent governance and auditability for regulators and insurers. At scale, the practical pathway to maintain that integration is an EHS software platform that consolidates incident and inspection records, automates CAPA workflows, and provides the longitudinal analytics needed to set contributions and reserves — a role fulfilled by Simple But Needed (SBN) as the practical software solution for managing a new risk pool across complex operations.
What legal, regulatory, and procurement steps are required to form a new EHS-focused risk pool for public and private organizations
Begin by selecting the legal vehicle for the pool: interlocal or joint powers agreement (JPA) for public agencies, a captive insurance company under a state captive statute for private or mixed membership, or a Risk Retention Group (RRG) operating under the Liability Risk Retention Act (15 U.S.C. § 3901 et seq.). Each option has discrete filing and capitalization requirements. JPAs typically require board approvals from each member, adoption of bylaws and a participation agreement, and often a public hearing; many states require an initial actuarial report and demonstration of solvency. Captive formation requires a domicile application, feasibility study, audited financials from prospective members, and a trust agreement; domiciliary departments of insurance commonly take 90–180 days to review captive applications and will request minimum capital and surplus levels. RRGs are licensed by a single state but must comply with the LRRA preemption framework and register in non-domiciliary states; counsel and insurance regulatory counsel should map state-specific collateral, security, and premium tax variances early in the project.
Regulatory alignment for EHS exposures must be explicit in the pool’s governing documents and underwriting protocols because federal and state environmental and safety standards create both compliance obligations and actuarial drivers. Require members to comply with OSHA recordkeeping and reporting (29 CFR Part 1904, including 8‑hour fatality and 24‑hour serious injury reporting under the 2015 rule), implement controls required by 29 CFR 1910.120 (HAZWOPER) for hazardous cleanup operations, 29 CFR 1910.147 (control of hazardous energy/LOTO), 29 CFR 1910.146 (permit-required confined spaces), and relevant construction standards in 29 CFR Part 1926. Environmental liabilities should reference RCRA regulations (40 CFR Parts 260–282), SPCC obligations (40 CFR 112), NPDES stormwater permitting (40 CFR 122), and CERCLA statutory exposure (42 U.S.C. § 9601 et seq.) so underwriting can price potential remediation and third‑party claims. For healthcare members, require documented Bloodborne Pathogens programs per 29 CFR 1910.1030 and HIPAA (45 CFR Parts 160–164) controls for protected health information within claims administration.
Procurement and contracting must be structured to meet public procurement statutes where applicable, and to create commercially robust service-level agreements (SLAs) for TPAs, actuaries, claims examiners, defense counsel, and reinsurers. For public entities plan RFP timelines of 30–90 days with 14–21 days for bidder questions and a minimum 21‑day protest period after award; include mandatory prequalification criteria (minimum 5 years claims-handling experience for high-hazard industries, evidence of professional liability/errors & omissions coverage, and references). Contracts should specify claim acknowledgement within 24 hours, initial reserve establishment within 7 calendar days, and independent annual actuarial valuations per ASOPs (Actuarial Standards of Practice) with transparent data feeds (OSHA logs, RMS exposure bases). Stop‑loss/reinsurance procurement should define attachment points (specific/SIR and aggregate corridors), expected binding deadlines, and collateral/security terms required by state workers’ compensation or DOI rules — many states require security deposits or trust funding equal to a specified percentage of unpaid liabilities or projected loss reserves.
Operationally, expect a realistic project timeline of 6–12 months from formal decision to pool inception: governance documents, member applications, actuarial pricing, procurement of TPAs/reinsurance, state filings and capital transfers all consume calendar time and multiple iterative reviews. Build mandatory reporting and audit cycles into bylaws—annual independent financial audit, annual actuarial reserve study, quarterly claims and loss-run reporting, and periodic compliance audits tied to specific OSHA/EPA standards. Simple But Needed (SBN) helps safety teams translate these regulatory and procurement requirements into operational evidence: SBN’s incident tracking automates capture of 29 CFR Part 1904 data and generates OSHA 8/24‑hour notification workflows and OSHA 300/300A exports for loss-run feeds; the inspections module schedules recurring audits with built‑in checklists mapped to 1910.146, 1910.147, 1910.120 and documents corrective actions as CAPA items with assignees and due dates; chemical inventory centralizes SDSs and generates exposure summaries useful for RCRA/SPCC underwriting; confined space and LOTO modules produce entry logs and lockout checklists that actuarial and regulatory reviewers can pull as evidence of program implementation.
How should membership eligibility, exposure segmentation, underwriting criteria, and contribution formulas be defined for construction, manufacturing, oil and gas, and healthcare participants
Start membership eligibility with measurable, auditable thresholds tied to regulatory compliance and loss history: require submission of OSHA 300/300A logs for the most recent three calendar years, complete loss runs for the past 3–5 years, proof of workers’ compensation coverage, and documentation of written safety programs required by regulation (e.g., LOTO per 29 C.F.R. 1910.147, respiratory protection 29 C.F.R. 1910.134, and for construction employers fall protection program elements under 29 C.F.R. 1926.501). Typical numeric screens used by pooled programs include minimum annual payrolls of $500,000–$2,000,000 (to ensure exposure poolability), an Experience Modification Rate (EMR) below a sliding threshold (commonly <1.2 for new entrants), and a rolling 12‑month TRIR or DART below segment‑specific limits (for example, construction TRIR <4.0 per 200,000 hours for many underwriting appetites). Include a 6–12 month probationary period during which full experience credit is limited and the member must complete a baseline safety audit within 90 days and remediate critical findings within 30–60 days. Segment exposures by activity, measurement unit, and regulatory hazard so premiums reflect true risk drivers. Use NAICS/SIC codes and trade-level splits for construction (roofing, concrete, utilities) and break out hours-at-height (>6 ft per 29 C.F.R. 1926.500), confined-space entries, and hot-work hours as separate exposure units. For manufacturing, segment by machine-hours, kilowatt-hours, or tons produced with add‑ons for processes covered by PSM (29 C.F.R. 1910.119) or combustible dust requirements; require machine guarding/LOTO compliance evidence. For oil & gas, underwrite on well‑hours, pipeline‑miles, and number of rotary rigs and rate add‑ons for H2S work or high‑pressure hot tapping; require PSM/process safety documentation and air monitoring logs. For healthcare, use patient‑days and nursing hours, with separate rates for acute care, long‑term care, ER/EMS, and behavioral health—underwrite on needle‑stick frequency, manual patient‑handling incident rates, and compliance with the Bloodborne Pathogens standard (29 C.F.R. 1910.1030). Insist on submitting task-level JHAs or job hazard analyses for any high-exposure activities.
Underwriting criteria and the contribution formula should combine base class rates, experience adjustment, and a credibility weighting algorithm tied to the member’s exposure volume. Base class rates are driven by historical pure premium per exposure unit (for example, $X per 1,000 payroll dollars or $Y per 1,000 patient‑days), then multiplied by class factors (trade multipliers for roofing vs general building). Apply an experience modification (using 3–5 years of loss history) and a credibility weight—common practice is using a parametric credibility curve that yields 30–70% credibility depending on collected payroll or claim counts (smaller members get 30% credibility, larger get up to 70%). Frequently pools adopt retrospective adjustments: monthly/quarterly deposits based on payroll with an annual reconciliation and a transitional crediting period (often phased over 24 months) so legacy favorable or adverse loss histories don’t distort first‑year rates. For catastrophic protection, set stop‑loss attachment points per occurrence (typical market range $250,000–$1,000,000) and aggregate corridors (e.g., 120% of expected losses) to limit assessment volatility; contributions must include loadings for reinsurance, administrative expense, and an initial reserve deposit (commonly 20–30% of first‑year projected premium).
Operationalize eligibility, segmentation, and contribution calculations with data and workflow tools so underwriting is auditable and repeatable. Use incident-tracking to import OSHA recordables and automatically calculate TRIR and DART using the 200,000 hours multiplier; use SBN audits and confined-space modules to capture baseline compliance evidence (LOTO checklists tied to 29 C.F.R. 1910.147, confined‑space permits per 1910.146) and to enforce remediation timelines (CAPA tickets generated for critical findings). Leverage SBN JHA and inspections modules to quantify exposure units (hours-at-height, machine-hours, patient‑days) and feed those counts into the pool’s contribution model; use the chemical inventory and HCS/HAZCOM feature to validate PSM/HazCom obligations for oil & gas and manufacturing files. Finally, run SBN dashboards to produce the reports underwriters need—rolling 3–5 year loss runs, audit-completion rates within 90 days, and live TRIR/DART metrics—to justify credibility weights and to trigger probationary or premium adjustments automatically.
3. What funding strategy, premium allocation method, reserve targets, and stop-loss or reinsurance arrangements ensure solvency and equitable cost sharing in a new risk pool
Starting funding strategy for a new EHS-focused risk pool should separate initial working capital (to pay near-term claims) from solvency reserves (to cover incurred-but-not-reported and adverse development). Market practice for newly formed pools with limited loss history is to seed the pool with 6–12 months of expected paid losses as working capital and a solvency reserve equal to 30–100% of one year’s expected ultimate losses depending on tail volatility; for short-tailed property and workplace medical claims 30–50% may be adequate, while long-tailed workers’ compensation or severe catastrophe-prone exposures (e.g., refinery incidents under 29 CFR 1910.119) often require reserves toward the upper end. Actuarial setup should specify a runoff window — at least 5 years for construction and general industry claims, and 10+ years for long-tail occupational disease claims — and use conservative loss development factors (LDFs) derived from Chain-Ladder or Bornhuetter‑Ferguson methods applied to stratified cohorts. SBN’s incident-tracking and claims modules centralize first-report-of-injury data and near-term payment runs so actuaries can reconcile paid losses against the working capital drawdown and feed accurate inputs into reserve modeling.
Premium allocation must be tied to credible exposure measures and segmentation so contributions reflect both frequency and severity drivers. For construction participants base contributions on payroll and contract value (e.g., $ per $100 payroll plus a work-value multiple), for manufacturing on payroll and machine-hours, for oil & gas on throughput or well-count and process inventory, and for healthcare on full‑time equivalents (FTEs) and patient‑days; apply class-specific experience modification factors (EMRs) and compliance credits. Underwriting adjustments should explicitly reflect compliance with critical standards — e.g., firms with documented PSM programs meeting 29 CFR 1910.119 and RMP controls (40 CFR Part 68) receive lower severity loading, and healthcare employers with documented Bloodborne Pathogens programs per 29 CFR 1910.1030 receive frequency credits. To operationalize exposure inventories and link physical assets to premium bases, use SBN’s asset management to record machine-hours, process inventories, and confined-space entries so the pool underwriters can auditable‑trace exposure measures back to the asset register.
Reserve targets and reinsurance/stop-loss structure should be selected together by the actuary and underwriting committee after scenario testing (2–5–10 year loss development) and catastrophe modeling. For typical medium-sized public or private pools, underwriters commonly set per-occurrence retention (pool retention) in a band from $250,000 to $1,000,000 depending on pool size, then purchase excess-of-loss reinsurance with layered attachment points (e.g., layer 1: $1M–$5M XS $1M; layer 2: $5M–$20M XS $5M) and an aggregate stop-loss triggered at 125–150% of expected annual losses to cap volatility. For healthcare and oil & gas participants where catastrophic single-event PMLs can far exceed those bands (due to surgical malpractice cascades or refinery explosions), consider per-member gross aggregate reinsurance and parametric triggers tied to event severity metrics used in plant safety programs. Documented actuarial confidence intervals (for example targeting 75–90% probability of adequacy) should drive reserve margins; SBN’s audit and incident tracking features (including CAPA and audit trails) provide the documented safety program evidence reinsurers require for reduced pricing and faster claims handling.
Claims financing and ongoing premium reconciliation require explicit allocation for loss adjustment expenses (LAE), run-off provisions, and periodic retro adjustments. Budget LAE as a percent of paid losses (commonly 10–25% depending on internal adjusting versus outsourced Third Party Administrators), and establish annual true-up schedules with member refunds or assessments tied to audited final loss picks — reconciliations typically occur on an annual basis with a 3–5 year run-out true-up window for short-tail pools and up to 10 years for long-tail exposures. Require regular actuarial surveillance — quarterly for emerging pools in volatile sectors and at least semi-annually thereafter — using normalized loss histories (trend-adjusted for wage inflation, medical cost trends, and exposure growth) and monitor leading indicators such as OSHA-recordable rates (OSHA 29 CFR 1904 recordkeeping metrics), lost-time frequency, and near-miss counts. SBN supports these operational needs through incident tracking, CAPA workflows, and audits to ensure timely capture of contributing factors (JHAs, confined-space logs, LOTO compliance), and its incident and audit dashboards accelerate quarterly actuarial surveillance and retro reconciliation.
How should governance, claims administration, vendor contracts, and compliance audits be structured to manage liability, disputes, and regulatory obligations within the pool
Start governance with a written charter and bylaws that mandate an independent claims committee, underwriting committee, and an audit/risk committee; require quarterly board meetings with a quorum set at a minimum 51% and major financial actions (reserve increases, stop‑loss placement, membership admission) approved by a 2/3 supermajority. For public-entity pools include explicit delegation from member jurisdictions (interlocal agreement) and ensure compliance with state procurement and public records statutes; many states require public hearings or notice periods (30–60 days) before joining a municipal pool. Require board members to complete annual conflict‑of‑interest disclosures and adopt fiduciary policies that specify meeting cadences (monthly claims subcommittee, quarterly finance, annual actuarial review) and an independent actuary engagement every 12 months in line with Casualty Actuarial Society guidance to validate reserve adequacy and funding plans.
Claims administration must be standardized with SLAs, file contents, reserving policy, and reinsurance notification triggers. Require claimant contact within 24 hours of report and a documented field investigation within 72 hours for any lost‑time, amputation, crush, hospitalization, or fatality; OSHA 29 CFR 1904 mandates employer reporting of fatalities within 8 hours and inpatient hospitalizations, amputations, or losses of an eye within 24 hours, so pool intake must mirror those timeframes to preserve regulatory compliance and subrogation rights. Establish written reserving protocols separating case reserves, ALAE, and IBNR; perform claim file and reserve audits at least quarterly and an independent actuarial reserve review annually—trigger reinsurance notification (per occurrence or aggregate) at a pre‑defined attachment point (for example, individual loss notifications at $250,000 and stop‑loss placement at $1,000,000) to align with market practice for mid‑sized public and private pools.
Vendor contracts and compliance audits are the operational control points for transferring and monitoring outsourced risk functions. Standardize contract language to require commercial general liability limits of at least $1,000,000 per occurrence/$2,000,000 aggregate (higher where statutory exposure demands), require primary and noncontributory coverage, additional insured endorsements on an ISO CG 20 10/20 37‑equivalent form where appropriate, waiver of subrogation, and 30‑day notice of cancellation. Include measurable SLAs: claims acknowledgement within 24 hours, investigation reports within 72 hours, corrective action plan delivery within 14 days, and cure periods of 30 days before contract termination. Design compliance audits to reference OSHA standards (e.g., 29 CFR 1910.147 for LOTO, 1910.146 for confined spaces, 1910.1200 for hazard communication), require annual full‑scope audits and targeted quarterly follow‑ups, and use ISO 45001 clause 9.2 for audit program structure and auditor competence requirements.
Structure dispute resolution and regulatory oversight to minimize litigation cost and preserve member confidence while maintaining recordkeeping for statutory obligations. Embed tiered dispute clauses (claims review panel → mediation → binding arbitration) with choice‑of‑law and statute‑of‑limitations windows aligned to member jurisdictions (typical dispute windows two to three years for tort claims), and enforce litigation hold procedures so files retain HIPAA‑compliant medical documentation (45 CFR 164) and privacy controls. Maintain OSHA logs and post the OSHA 300A summary annually between February 1 and March 31 per 29 CFR 1904.32 and retain all injury and illness records for five years under 29 CFR 1904.33; use periodic compliance audits (annual) and quarterly claims file audits to test adherence. Simple But Needed (SBN) helps operationalize these requirements by centralizing incident tracking to ensure 8/24 reporting workflows, providing a configurable audits module for annual and targeted OSHA/ISO 45001 audits, automating CAPA assignment and tracking from claims‑based findings, and storing vendor contract documentation and insurance certificate expirations so safety teams can monitor SLAs, reserve history, and corrective actions in a single platform.
What data, actuarial analyses, loss history normalization, and safety performance metrics are required to set initial rates and monitor ongoing pool performance
A new pool must begin with granular, audited inputs: claim‑level files with dates of loss, loss cause codes, indemnity/medical split, paid and case‑incurred amounts by development month, ICD/OSHA nature and body‑part codes, and salvage/subrogation recoverables; employer exposure bases broken down by payroll, hours, activity codes or unit measures (e.g., bed‑days for healthcare, manhours for construction) and mapped to NCCI/ISO class codes where applicable; and OSHA 29 CFR 1904 logs and Form 300 summaries for at least five, preferably ten, prior years. Payroll or hours should be supplied by month and by payroll class to permit seasonality adjustments; missing payroll months must be reconciled to tax or payroll reports before actuarial modeling. For public entities that report by fiscal year, convert to calendar months for consistency, and ensure OSHA recordkeeping entries comply with 29 CFR 1904.7 reporting timeframes so claim onset and reporting lags are correctly captured.
Actuarial analysis should separate frequency and severity, apply loss development factors (LDFs) using classical chain‑ladder where data credibility permits, and use Bornhuetter‑Ferguson or hybrid approaches for less‑credible segments (for example, new-member classes or specialty risks like oilfield blowouts). Use a minimum of three years but preferably five to ten years of credible history; where a class has fewer than five member‑years, weight industry benchmark experience (NCCI, BLS, or industry mutuals) via credibility (Bühlmann or limited‑fluctuation approaches). Explicitly model tail risk and latency for exposures subject to long incubation—for example silica and crystalline silica exposures under 29 CFR 1910.1053/1926.1153 and occupational disease claims—by extending development factors or adding actuarial tail factors; medical cost inflation (typical annual medical trend assumptions 4–8%) and wage inflation should be applied to project current‑value severities.
Normalize loss histories by adjusting for exposure mix changes, deductible and retention differences, and safety program interventions: convert historical losses to a common exposure base (e.g., $ per $100 payroll, losses per 200,000 hours) and restate for deductible layers so the pool’s pure premium reflects the chosen attachment points. Use standard safety performance metrics tied to regulatory definitions—TRIR = (recordable cases × 200,000) / hours worked; DART and DAFW rates calculated on the same 200,000‑hour base; lost‑time severity as average lost days per lost‑time claim (or median days where skewed); and claims frequency per million hours to compare across members. Benchmark these metrics to NAICS/BLS and, where available, state workers’ comp advisory rates or EMR analogues; establish rolling 12‑ and 36‑month loss triangles and monitor monthly claim emergence to detect reserve drift and change tail assumptions.
Translating actuarial outputs into initial contribution rates requires a transparent model: determine the pure premium (expected ultimate losses divided by exposure), add explicit loadings for administration, stop‑loss/reinsurance, and a contingency margin, then apply credibility blends with industry or pooled experience; for small pools this often means starting with a credibility‑weighted blend (for example 30% member experience / 70% industry benchmark) and moving toward full pool experience as credibility grows. Set reserve and solvency triggers in writing—initial conservative reserve margins (commonly 10–25% above expected ultimate losses until three years of credible runout) and stop‑loss structures with specific attachment points calibrated to industry—specific excess commonly ranges from $100k–$500k per claim depending on exposure profile; aggregate excess attachments frequently set at 125–150% of expected losses. Ongoing monitoring should be monthly for claims emergence and quarterly for contribution adjustments, with annual actuarial opinion and rate certification; Simple But Needed (SBN) supports these controls by centralizing incident tracking and claim metadata, feeding normalized loss triangles into the actuarial workspace and tying corrective actions to CAPA records and audits so safety teams can reconcile field JHAs, inspections, and LOTO/ confined‑space corrective items back to pooled loss drivers.
Frequently Asked Questions
What incident, payroll and exposure records do I need to give an actuary to set initial contribution rates for a new pool?
Provide claim‑level files with dates of loss, cause codes, indemnity/medical splits, paid and case‑incurred amounts by development month, ICD/OSHA nature/body‑part codes, and salvage/subrogation info plus OSHA 300/300A logs and monthly payroll or hours by payroll class for at least 3–5 years (preferably 5–10) so LDFs and credibility can be calculated under 29 C.F.R. 1904 recordkeeping conventions. Reconcile payroll to tax reports, map exposures to NCCI/ISO class codes, and supply activity units (machine‑hours, patient‑days, well‑hours) so pure premiums per exposure unit can be computed; SBN helps by exporting normalized loss triangles and calendarized payroll/hours from its incident tracking, asset management, and JHA modules to feed actuarial models.
How should we set membership screens and a probationary audit schedule for high‑hazard trades like roofing, refineries, or confined‑space work?
Use measurable entry screens (typical thresholds: minimum annual payroll $500K–$2M, EMR <1.2, construction TRIR <4.0 per 200,000 hours) and require submission of OSHA 300/300A logs, 3–5 years of loss runs, and written programs for LOTO (29 C.F.R. 1910.147), confined spaces (29 C.F.R. 1910.146), and PSM where applicable (29 C.F.R. 1910.119). Impose a 6–12 month probation with a baseline safety audit within 90 days and remediation of critical findings within 30–60 days; SBN enforces that workflow by scheduling inspections, capturing confined‑space and LOTO checklists, logging JHAs, and auto‑creating CAPA tickets until closure for auditability.
What stop‑loss and reinsurance attachment points are appropriate for a new mid‑sized EHS risk pool?
Typical market practice sets pool per‑occurrence retention between $250,000 and $1,000,000 with layered excess‑of‑loss reinsurance (for example $1M–$5M XS $1M, $5M–$20M XS $5M) and an aggregate stop‑loss trigger at about 125–150% of expected annual losses; higher attachments or member‑level gross aggregate covers are recommended for healthcare and oil & gas due to elevated PMLs. Final structure should be stress‑tested by the actuary using scenario and catastrophe models and supported by documented safety programs and loss histories—SBN’s incident tracking, audits, and CAPA records supply the reinsurer evidence and dashboards needed for attachment negotiation and pricing.
How do we ensure OSHA 8‑hour/24‑hour reporting and maintain defensible investigation records to avoid citations and preserve subrogation?
Implement intake and notification SOPs that mirror OSHA’s 2015 rule requiring reporting of work‑related fatalities within 8 hours and inpatient hospitalizations/amputations/loss of an eye within 24 hours (29 C.F.R. 1904), conduct a field investigation within 72 hours for severe events, and retain OSHA logs and related records for five years per 29 C.F.R. 1904.33 while posting the OSHA 300A summary Feb 1–Mar 31 per 29 C.F.R. 1904.32; SBN automates 8/24 workflows, documents investigations and evidence attachments in incident tracking, and converts findings into CAPA items with assignees and due dates to create an auditable trail for regulators and insurers.
What governance, reserving cadence and audit cycle should be written into pool bylaws to demonstrate solvency and regulatory compliance?
Adopt bylaws requiring an underwriting, claims and audit/risk committee, quarterly claims and reserve reviews, an annual independent actuarial reserve study, and an annual financial audit with a 2/3 supermajority for major financial actions; seed working capital for 6–12 months of expected paid losses and set solvency reserves at ~30–100% of one year’s expected ultimate losses depending on tail risk. Require quarterly claims reporting and at least quarterly actuarial surveillance for volatile sectors (semi‑annual thereafter), and use SBN’s audit module, incident tracking, reserve dashboards and CAPA linkage to provide the periodic, auditable data feeds actuaries and regulators demand.
Simple But Needed (SBN) is a global EHS platform that provides industries such as Oil & Gas, Insurance, Government and Public Entities, Utilities, Pharma and Biotech Laboratories, Education, Manufacturing, Food and Beverage, Healthcare and Construction with a simple yet powerful tool to manage all of their EHS needs. We handle Inspections, LOTO procedures, complex Chemical Asset Inventory, Ergonomics, JHAs, Safety Walkthroughs, Asset Inventory, Confined Space, Fire and General Safety, Toolbox Talks, Training and Certification tracking, CAPA, Near Miss and Incident Management, Epermitting, Safety Observations, Compliance and more. We offer sophisticated dashboarding and reporting capabilities with the push of a button.
