When an earthquake occurs in a workplace, immediate protective actions—Drop, Cover, and Hold On, followed by rapid, organized evacuation when structural damage or secondary hazards warrant—are the most effective means of reducing injuries from falling objects, partial collapse, and displaced equipment. For EHS professionals, earthquake response is not only about life safety: OSHA requirements for Emergency Action Plans (29 CFR 1910.38), means of egress standards (29 CFR 1910.36/37), the General Duty Clause, and industry guidance such as NFPA 1600 create clear expectations for documented preparedness, training, and post‑event response. Failure to meet these obligations can produce regulatory citations, significant workers’ compensation and liability costs, extended operational downtime, and elevated third‑party exposure when chemical releases, electrical hazards, or compromised asset integrity follow seismic events.
Effective earthquake response at an enterprise level requires coordinated hazard assessments, secured equipment and inventory, utility isolation and LOTO procedures, trained evacuation and accountability protocols, and a disciplined system for damage inspection, incident reporting, and corrective action tracking. Maintaining these elements across multiple sites, shifts, and contractors demands centralized documentation, timely notifications, and auditable records for regulators and insurers. Centralizing plans, inspections, incident reporting, asset and chemical inventories, corrective actions, and contractor management in a single EHS platform streamlines compliance and recovery efforts — Simple But Needed (SBN) is designed to provide that capability at scale.
How to develop and test an earthquake-specific emergency action plan for high-risk industrial facilities
Start with regulatory-anchored scope and content. For general industry facilities the plan should meet the requirements of 29 CFR 1910.38 (Emergency Action Plans): written procedures, designated escape routes, employee duties, procedures for accounting for employees after evacuation, and names or job titles of persons to contact. If your operations include hazardous substance response, incorporate HAZWOPER obligations in 29 CFR 1910.120 (training, response roles, and PPE) and ensure coordination with your site-specific hazardous materials emergency response plan. For construction-related work on site, include the 29 CFR 1926.35 elements. Tie those regulatory elements to seismic-specific hazards (e.g., collapse, secondary fires, release of toxic/flammable chemicals, ruptured storage tanks) and to engineering inputs such as the facility’s seismic design basis (ASCE/IBC design level used for the building) so the EAP drives decisions that match the plant’s structural and process risk profile.
Define measurable expectations and limits for life-safety actions versus property-protection actions. OSHA requires that employees be trained and the plan reviewed upon initial assignment and whenever the plan changes (29 CFR 1910.38(c)); for high-risk industrial facilities adopt an exercise cadence and performance targets that exceed the minimum: table-top reviews quarterly, functional exercises (communications, accountability, critical-shutdown procedures) semiannually, and one full-scale integrated drill annually. Set accountability benchmarks (for example, complete headcount at muster within 15 minutes) and maximum allowed durations for pre-evacuation process interventions—explicitly document any tasks that must be performed before seeking shelter or evacuating and limit them to tasks that can be completed in under two minutes or by a trained operator from a safe location. Record these metrics in each exercise and use them to drive corrective actions.
Operationalize the chain of command, communications redundancy, and return-to-work criteria within the plan. Designate an Incident Commander and alternates (name or job title, per 1910.38) who have authority to order shelter-in-place or full evacuation and to authorize re-entry only after a competent person or licensed structural engineer clears the area. Specify redundant notification methods (site-wide PA, SMS mass notification with delivery confirmation target of under 3 minutes, two-way radios on backup power) and document post-event initial damage assessments: an initial “competent person” walkdown to identify imminent life-safety hazards (within 1–2 hours), followed by engineer-level structural inspection and atmospheric monitoring where confined spaces or potential chemical releases exist (apply 29 CFR 1910.146 for permit-required confined-space reentry procedures). Require written “permit-to-reoccupy” or “release-for-operations” forms signed by the qualified inspector/engineer before restarting any process lines.
Use your management system to make the EAP executable and auditable. Configure Simple But Needed (SBN) to host the earthquake EAP as a living document and to run the exercise and post-event workflows: create a reusable “Earthquake EAP Drill” inspection template that logs drill start/stop times, headcount time (benchmark <15 minutes), number of personnel unaccounted, photos of assembly areas, and time-to-secure critical systems; push training assignments and 1910.38 retraining reminders via SBN’s audits/training scheduling; route drill deficiencies into SBN CAPA with assigned owners and due dates (e.g., corrective action to reduce headcount time to under 15 minutes within 30 days); use incident tracking to capture any equipment damage or chemical releases that trigger HAZWOPER response, and link JHAs or confined-space permits (1910.146) to post-event re-entry tasks so every re-start step is tracked, authorized, and auditable.
How to conduct employee accountability, evacuation, and shelter-in-place procedures during and after an earthquake
During the seismic event the primary actions for employees are “Drop, Cover, and Hold On” as recommended by FEMA and OSHA guidance; running for exits during strong shaking increases injury risk from falling debris. Employers must train personnel to avoid elevators during shaking and to orient to pre-designated safe zones (under rated workbenches or against interior walls) if immediate evacuation is unsafe. Under 29 C.F.R. 1910.38 (Emergency action plans) employers must have procedures that address both evacuation and shelter-in-place decisions; those procedures should define who makes the go/no‑go decision (typically the incident commander or site safety manager) and the criteria used (e.g., visible structural damage, active chemical release, gas odor, or utilities failure). Use SBN incident tracking to capture the time-stamped actions and decisions during the quake so supervisors can demonstrate who ordered shelter-in-place or evacuation and when.
Accountability procedures must be specific and exercised in drills: 29 C.F.R. 1910.38(e) requires employers to develop procedures to account for all employees after evacuation. Practical controls include pre-assigned floor wardens, printed rosters cross-checked against electronic badge logs, and a target accountability completion time (industry best practice is to aim to account for all personnel within 10–15 minutes of alarm initiation). Contractors, visitors, and maintenance vendors must be included in the roll-call process; maintain a separate, regularly updated contractor roster and means of on-site identification so that visiting personnel are not omitted from counts. To operationalize drill outcomes and continuous improvement, use the SBN inspections platform to schedule and record evacuation drills, store roll‑call checklists, and track drill performance metrics over time: SBN inspection software supports digital muster checklists and automated drill reports.
Evacuation route and shelter-in-place logistics must align with code requirements: designate and maintain exit routes per 29 C.F.R. 1910.36 and 1910.37 (permanent, unobstructed exits, minimum exit signage and lighting) and locate external assembly areas at safe distances from buildings and potential falling hazards (a common planning rule is to position muster points at least one building height away from structures and overhead hazards). For shelter-in-place when hazardous material release is present, integrate ventilation shutoff and containment procedures consistent with your HAZWOPER contingency plan (29 C.F.R. 1910.120), and document who has authority to isolate HVAC and critical utilities. After the shaking ceases, structural and utility inspections by a qualified person should occur before interior re-entry—companies should define a competency standard for that qualified person (structural engineer or qualified EHS/maintenance lead) and an inspection timeframe, e.g., initial rapid building safety assessment within 1–2 hours and a detailed inspection before resuming normal operations. Use SBN asset management and inspections to record route signage condition, HVAC isolation actions, and the qualified inspector’s findings so evacuation routes and shelter-in-place controls are auditable.
Post-event accountability and reunification require documented procedures for release of personnel and phased return-to-work. If injuries occur that meet OSHA recordability criteria (29 C.F.R. 1904), log those events within the required timelines and initiate medical follow-up and internal incident reporting immediately; non-injury facility damage and near-misses should feed into a CAPA workflow to correct evacuation route obstructions, signage failures, or communication gaps. Before any technician or operator returns to damaged equipment, require a written permit-to-work with LOTO applied where energy-isolating devices are involved—use documented JHA and confined-space permits where applicable. SBN supports these steps through incident tracking for the initial event record, CAPA to manage corrective actions from after-action reviews, LOTO procedure management to control equipment during repairs, and inspections/audits to verify that muster points, exit lighting, and exit routes are restored and re-tested.
Frequently Asked Questions
What are the minimum elements OSHA requires in an earthquake emergency action plan?
OSHA 29 C.F.R. 1910.38 requires a written plan that includes designated escape routes, employee duties, procedures for accounting for employees after evacuation, and the names or job titles of persons to contact; include HAZWOPER (29 C.F.R. 1910.120) elements where hazardous-substance response is possible and 29 C.F.R. 1926.35 for on-site construction activities. Use SBN to host the living EAP document, link it to audits/training scheduling for mandated retraining, and store related inspection templates and checklists so the plan and revision history are auditable (SBN audits/training, inspections).
How fast do we need to account for employees after an earthquake evacuation?
OSHA 29 C.F.R. 1910.38(e) requires an employer to have procedures to account for all employees after evacuation; industry best practice is to complete a headcount within 10–15 minutes of alarm initiation with a muster benchmark of ≤15 minutes. SBN digital muster checklists and inspections log headcount times and missing-person flags, while incident tracking timestamps decisions and routes discrepancies into CAPA for corrective action (SBN inspections, incident tracking, CAPA).
Who can authorize re-entry after earthquake damage and what documentation is required?
The Incident Commander or designated alternates (per 29 C.F.R. 1910.38) should authorize re-entry only after a competent person or licensed structural engineer completes a rapid assessment and a detailed engineer inspection, and a written permit‑to‑reoccupy or release‑for‑operations is signed; initial competent‑person walkdown is recommended within 1–2 hours, with engineer-level clearance before resuming operations. Record and route the inspection findings, permit, and any required JHAs or confined‑space permits through SBN so re‑entry steps are auditable (SBN inspections, incident tracking, JHA, confined space).
What immediate actions should operations take to secure hazardous materials and critical equipment after shaking stops?
Prioritize life‑safety; then isolate utilities, secure tanks and lines, shut HVAC where a release is suspected, and apply LOTO before any property‑protection work—HAZWOPER (29 C.F.R. 1910.120) guidance should govern hazardous‑substance actions and LOTO procedures must be used for energy control. Use SBN chemical inventory to identify at‑risk materials, SBN LOTO workflows to control equipment, and incident tracking plus CAPA to document containment actions and assign remediation tasks (SBN chemical inventory, LOTO, incident tracking, CAPA).
How often should earthquake drills and exercises be conducted for high‑risk industrial facilities?
OSHA 29 C.F.R. 1910.38 requires training at initial assignment and when the plan changes, but high‑risk facilities should exceed this with quarterly table‑tops, semiannual functional exercises (communications, shutdowns), and one full‑scale integrated drill annually, while tracking performance targets such as muster ≤15 minutes. Configure SBN to schedule and run drill templates, capture drill metrics (headcount times, photos, missed actions), and route deficiencies into CAPA with owners and due dates to close gaps (SBN audits/training, inspections, CAPA).
Simple But Needed (SBN) is a global EHS platform that provides industries such as Oil & Gas, Insurance, Government and Public Entities, Utilities, Pharma and Biotech Laboratories, Education, Manufacturing, Food and Beverage, Healthcare and Construction with a simple yet powerful tool to manage all of their EHS needs. We handle Inspections, LOTO procedures, complex Chemical Asset Inventory, Ergonomics, JHAs, Safety Walkthroughs, Asset Inventory, Confined Space, Fire and General Safety, Toolbox Talks, Training and Certification tracking, CAPA, Near Miss and Incident Management, Epermitting, Safety Observations, Compliance and more. We offer sophisticated dashboarding and reporting capabilities with the push of a button.
