Skip to content

Manage Privacy Options

To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions. Cookie Policy

Always active
Functional Always active

The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.

Your consent ID: not set yet

What Is the History of the MSDS to SDS Transition Under GHS?

  • June 4, 2026
  • 13 min read

For decades the Material Safety Data Sheet (MSDS) was the primary means of communicating the hazards and safe handling information for chemicals in workplaces and supply chains. MSDSs grew out of earlier industrial practices and became widespread with the adoption of national hazard communication rules (for example, OSHA’s Hazard Communication Standard in the United States). While MSDSs provided valuable information, their content and format varied widely from supplier to supplier and country to country, which created gaps in hazard communication, made training and emergency response more difficult, and complicated international trade.

The drive to harmonize and modernize chemical hazard communication led to the United Nations’ development of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS). First published by the UN in 2003, the GHS established common criteria for classifying chemical hazards and standardized label elements—pictograms, signal words, hazard and precautionary statements—and recommended a uniform Safety Data Sheet (SDS) structure. Unlike legacy MSDSs, the GHS-format SDS uses a prescribed 16-section layout and clearer content requirements to ensure consistency, completeness, and easier interpretation by workers, emergency responders, and downstream users.

Regulatory adoption of the GHS has occurred on different timetables around the world. Many jurisdictions updated existing hazard communication laws to align with the GHS: for example, the European Union implemented the CLP Regulation beginning in 2009 and associated SDS requirements through 2015, Canada overhauled WHMIS to WHMIS 2015, and the U.S. Occupational Safety and Health Administration revised its Hazard Communication Standard in 2012 to require GHS-aligned labeling and SDSs, with phased compliance deadlines for manufacturers, importers, distributors, and employers. Those transitions required suppliers to reclassify substances and mixtures, reissue SDSs in the 16-section format, relabel products, and provide training on the new labels and SDS structure.

The MSDS-to-SDS transition under GHS thus represents both a technical and a practical shift: it standardized how hazards are determined and communicated, improving clarity for global commerce, emergency response, and worker protection, but also imposed significant compliance work—reclassification, document conversion, labeling changes, and education. Understanding that history helps explain why modern SDSs look and read differently from older MSDSs, why jurisdictions may still differ in implementation details, and why staying current with SDS practices remains a critical part of chemical safety management.

 

 

Origins and evolution of MSDS systems

Material Safety Data Sheets (MSDSs evolved from informal, manufacturer‑created product information sheets into the primary written means of communicating hazards about chemicals to workers, emergency responders and downstream users. In the mid‑20th century, as industrial chemical use expanded, suppliers increasingly began attaching hazard and handling notes to shipments; however, there was no consistent structure, content or legal mandate, so documents varied widely in completeness and quality. Regulatory systems began to require more systematic hazard communication — notably the United States’ Hazard Communication Standard in the 1980s — which formalized employer and supplier responsibilities and made MSDSs a routine compliance document, but global inconsistency in classification criteria and sheet formats persisted.

Pressure for international harmonization led to development of the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS), a multilateral effort driven by the UN and other international bodies to create consistent classification criteria, standardized label elements and a model safety data sheet format. The UN released the first GHS edition in the early 2000s, which included a recommended 16‑section Safety Data Sheet (SDS) layout along with uniform hazard classes, signal words, hazard statements, precautionary statements and pictograms. Over the following decade many jurisdictions amended their laws to align with GHS principles, and regulators and industry shifted from the older, variable MSDS approach to the standardized SDS format and GHS classification rules — a transition that proceeded in phases and with some regional tailoring.

The practical MSDS→SDS transition under GHS therefore involved both substance and structure: suppliers were required to reclassify chemicals against GHS criteria, replace disparate MSDSs with the 16‑section SDS template, and update labels to include GHS pictograms, signal words and harmonized hazard/precautionary statements. That brought tangible benefits — clearer, more consistent hazard communication across borders, improved emergency response information, and easier regulatory compliance for multinational supply chains — but also challenges, including the burden of reclassification, translation and record updates, training needs for workers and emergency services, and domestic regulatory differences that left some national variations in implementation. Today “SDS” and the 16‑section layout are widely accepted as the global standard, but ongoing harmonization work and national adaptations mean the evolution from MSDS to SDS continues in practice.

 

UN GHS development and international adoption timeline

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) was developed under the United Nations as a voluntary international framework to harmonize hazard classification, labeling and safety data sheet (SDS) content. Work began in the late 1990s with expert meetings convened by the UN to reconcile many conflicting national and industry schemes; the first edition of the GHS text was published by the UN in 2003. A UN Sub‑Committee of Experts on the GHS (SCEGHS) was established to develop and maintain the system, producing periodic revised editions and guidance that member states and regional bodies can adopt on their own timelines. Because the GHS is a living document, the technical criteria and guidance have been updated repeatedly; jurisdictions that implement the GHS typically choose which edition or set of revisions to adopt and then set phased compliance dates.

Adoption has been staggered and uneven across jurisdictions. Major regulatory milestones tied to GHS concepts include the European Union’s CLP Regulation (adopted in 2008) which aligned EU classification and labeling rules with GHS principles, the United States’ revision of OSHA’s Hazard Communication Standard (finalized in 2012) to align with GHS provisions and phased in over several years, and Canada’s update to WHMIS (often referred to as WHMIS 2015) to incorporate GHS elements. Many other countries and regions — including Australia, Japan, Korea, and a wide range of developing countries — have moved to adopt GHS-based rules, but each followed its own timetable and sometimes adopted different editions or customized provisions (for example, variations in precautionary statements or cutoffs). The net effect is a global patchwork where the GHS provides common technical reference points but national implementation dates and regulatory details differ.

The transition from the older, heterogeneous Material Safety Data Sheets (MSDS) to the harmonized 16‑section Safety Data Sheet (SDS) format is a central outcome of GHS implementation. Historically MSDSs varied widely in content, order, terminology and quality; GHS introduced a consistent 16‑section layout and clearer minimum content requirements to improve communication across borders and supply chains. Jurisdictions that adopted GHS rules required suppliers to reclassify chemicals against GHS criteria, relabel containers, and issue new SDSs in the 16‑section format according to set compliance deadlines — a process that provoked a substantial program of product re‑assessment, authoring and training. Benefits have included more consistent hazard communication, easier downstream compliance and enhanced worker protection; challenges have included the cost and effort of reclassification, ensuring correct translations and local adaptations, and keeping SDSs current as GHS revisions and national rules evolve.

 

Regulatory milestones in major jurisdictions (EU, USA, Canada, others)

The modern regulatory shift toward a harmonized chemical hazard communication system began with the UN’s Globally Harmonized System (GHS) of Classification and Labelling of Chemicals, first published in the early 2000s. Major jurisdictions then moved to incorporate GHS elements into their national and regional frameworks. In the European Union, the CLP Regulation (adopted to align EU law with GHS) and the broader REACH framework reworked classification, labeling and information requirements across member states, creating a single legal basis for how substances and mixtures are classified and how safety data is presented. In the United States, OSHA revised the Hazard Communication Standard in 2012 to adopt GHS-style label elements and the standardized Safety Data Sheet (SDS) format, with phased compliance deadlines to allow employers and suppliers to update labels, SDSs and training. Canada adopted a revised WHMIS (often called WHMIS 2015) to align with GHS, and many other jurisdictions — including Japan, South Korea, Australia and numerous emerging economies — have implemented GHS-based requirements on similar staggered timetables, producing a patchwork of broadly aligned but still varying national rules.

The concrete regulatory milestone that most workplaces felt was the formal replacement of legacy Material Safety Data Sheets (MSDSs) by standardized 16‑section Safety Data Sheets (SDSs). Under GHS, the SDS sections and the core elements of hazard communication (pictograms, signal words, hazard statements and precautionary statements) became internationally defined, which forced producers and importers to reclassify chemicals, reissue hazard information and redesign labels and documentation. Regulators typically provided multi‑year transition windows during which companies converted MSDS content into the 16‑section SDS structure and trained downstream users in the new label elements and safety information. For example, the U.S. OSHA rule and Canada’s WHMIS transition included explicit deadlines for supplier updates and employee training, while the EU’s CLP/REACH instruments set out obligations for classification and for the content and language of SDSs supplied in the internal market.

Despite the broad benefits of consistency, implementation brought challenges that became new regulatory focal points. Differences in which edition of the GHS each jurisdiction adopted (and subsequent updates to GHS itself) produced classification mismatches and ongoing divergence in mixture rules, concentration cutoffs and legal labeling formats. Language and translation requirements, differing enforcement approaches, and the administrative burden of updating thousands of product documents strained manufacturers, importers and distributors. Practical compliance responses included centralized chemical inventories, formalized classification procedures, use of SDS authoring tools, and integration with broader safety programs (for example, for procedure control and audits). Many organizations also implemented or linked to safety-management software to track compliance tasks and documentation; for example, companies may integrate inspection and procedure tracking tools into their compliance workflows (see https://sbnsoftware.com/products/inspection-software/). Overall, the MSDS→SDS transition under GHS is a clear regulatory milestone: it standardized communication of chemical hazards internationally, while leaving room for jurisdictional differences that still require active compliance management.

 

Transition from MSDS to 16‑section SDS: content and format changes

The transition from the traditional Material Safety Data Sheet (MSDS) to the standardized 16‑section Safety Data Sheet (SDS) under the Globally Harmonized System (GHS) centralized and clarified what information must appear and where. Under older MSDS schemes the number, order and content of sections varied widely between manufacturers and jurisdictions, which made it difficult for workers and emergency responders to find critical data quickly. The 16‑section SDS creates a consistent order and explicit headings (for example: identification, hazard(s) identification, composition/information on ingredients, first‑aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and other information). This reordering and the requirement for specific data types (such as GHS hazard classifications, standardized hazard and precautionary statements, and supplier emergency contact details) improved clarity, comparability, and emergency usability.

Historically, the push for SDS standardization arose from international recognition in the 1990s that divergent MSDS practices impeded safe chemical handling and trade. The United Nations developed the Globally Harmonized System to harmonize hazard classification and communication worldwide, producing guidance that included the standardized SDS concept in the early 2000s. After the UN guidance was published, jurisdictions began to adopt GHS elements into national regulations: for example, the European Union modernized classification and labelling rules and aligned chemical communication requirements, the United States revised OSHA’s Hazard Communication Standard to incorporate GHS-consistent SDS and label elements, and Canada updated WHMIS to a GHS-based system. Adoption timelines and exact legal requirements differ by country, but the overall historical arc is clear: voluntary international guidance led to phased regulatory adoption and the replacement of inconsistent MSDS formats with the 16‑section SDS.

The practical effect of the MSDS→SDS shift has been significant: users gain faster access to standardized hazard information, emergency responders can locate critical response and transport details without hunting through varied formats, and multinational companies can harmonize documentation across markets. Challenges accompanied the change — translating classification criteria into new hazard classes, retrofitting legacy data into the prescribed SDS sections, training workers and supply‑chain partners, and dealing with differences in regional adoption timing and additional national requirements (for example, country‑specific exposure limits or regulatory citations). Overall, the transition under GHS has increased transparency and consistency in hazard communication, while implementation continues to evolve as jurisdictions refine how they incorporate the GHS into their regulatory frameworks.

 

 

Implementation challenges, industry impact, and ongoing harmonization

The transition from varied, often inconsistent Material Safety Data Sheets (MSDSs) to the Globally Harmonized System’s standardized Safety Data Sheets (SDSs) grew out of a need to reduce confusion and improve worker and emergency responder safety worldwide. Historically, MSDSs were developed regionally or by individual manufacturers and differed widely in content, format, and hazard criteria. In response, the United Nations developed the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), first published in 2003, which introduced a harmonized approach to hazard classification and a standardized 16‑section SDS format (and promoted the use of the term “SDS” instead of “MSDS”). Many jurisdictions then updated their chemical communication laws on different schedules and with varying choices of GHS building blocks — for example the EU implemented the CLP Regulation and related SDS requirements following adoption of GHS concepts, the U.S. revised OSHA’s Hazard Communication Standard to align with GHS (finalized in 2012 with phased compliance dates), and Canada implemented WHMIS 2015 to move from the older WHMIS system to one aligned with GHS.

Implementation challenges have been practical, technical and administrative. Organizations faced massive reclassification and reauthoring workloads to produce compliant 16‑section SDSs for all products, often requiring toxicological and exposure data that were incomplete or unavailable. Differences in national adoption (timing, incorporated GHS revisions, optional flexibilities) created fragmentation rather than full global uniformity, complicating cross‑border trade and supplier–customer coordination. Other issues included language and translation accuracy for multinational supply chains, inconsistent enforcement and interpretation by regulators, costs and capacity constraints for small and medium enterprises, and the training burden for workers and safety professionals to understand the new format and revised hazard communication elements.

Ongoing harmonization remains a work in progress. The UN periodically revises GHS guidance and criteria, but jurisdictions adopt those revisions on differing schedules; some regulatory frameworks add or retain country‑specific requirements. Current priorities to improve harmonization include clearer and more consistent guidance on mixture classification, nanomaterial and environmental hazard criteria, and alignment on classification for physical hazards; there is also growing momentum toward electronic SDS systems (eSDS) to improve distribution and version control. Practical steps that have helped industries adapt include phased implementation plans, centralized SDS authoring and management tools, investment in training and change management, and supplier engagement programs — but sustained international coordination, resource support for regulators and smaller companies, and continued technical work on difficult classification areas are still needed to realize the full promise of a truly global, efficient SDS regime.

 

Simple But Needed (SBN) is a global EHS platform that provides industries such as Oil & Gas, Insurance, Government and Public Entities, Utilities, Pharma and Biotech Laboratories, Education, Manufacturing, Food and Beverage, Healthcare and Construction with a simple yet powerful tool to manage all of their EHS needs. We handle Inspections, LOTO procedures, complex Chemical Asset Inventory, Ergonomics, JHAs, Safety Walkthroughs, Asset Inventory, Confined Space, Fire and General Safety, Toolbox Talks, Training and Certification tracking, CAPA, Near Miss and Incident Management, Epermitting, Safety Observations, Compliance and more. We offer sophisticated dashboarding and reporting capabilities with the push of a button.

 

See why teams choose SBN

Inspections, corrective actions, audits and compliance — made simple, easy and effective. Start a free trial and see it in your own workflow.

Start your free trial